This robust carbon steel stock sheet, precisely manufactured to 0.163" thickness, 18" width, and 37" length, is engineered for superior performance in heavy-duty pulling and lifting scenarios.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.163" |
| Length | 18" |
| Width | 37" |
Built to exacting engineering tolerances, this carbon steel stock sheet offers exceptional tensile strength and rigidity, crucial for load-bearing applications. The 0.163" (approximately 4.14mm) thickness, combined with a 18" x 37" dimension, provides a substantial surface area for structural integrity and force distribution. Its inherent durability and resistance to deformation make it ideal for fabricating custom pulling fixtures, reinforcing lifting points, or as a base plate in material handling equipment. The material's carbon content ensures a balance of hardness and toughness for reliable operation under stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select appropriate mounting hardware rated for the intended load. 2. Ensure mounting surface is clean, level, and structurally sound. 3. Securely fasten the stock sheet using specified hardware, ensuring even torque distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade fasteners for mounting. | Always utilize fasteners with a tensile strength rating exceeding the expected operational load. |
| Neglecting to verify the structural integrity of the mounting surface. | Thoroughly inspect and reinforce the mounting surface to guarantee it can safely support the combined weight and dynamic forces. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom winch mounting plates, Reinforced towing points, Fabrication of lifting jigs and fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||