This heavy-duty carbon steel stock sheet offers exceptional strength and durability for critical pulling and lifting operations. Its substantial thickness and dimensions ensure reliable performance under extreme loads.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.640" |
| Length | 41" |
| Width | 22" |
Precision-manufactured to tight tolerances, this 0.640-inch thick carbon steel stock sheet measures 41 inches in length and 22 inches in width. Exhibiting high tensile strength and yield strength characteristic of industrial-grade carbon steel, it is engineered to withstand significant dynamic and static loads. The material's inherent toughness and impact resistance make it ideal for fabrication into robust components used in winches, hoists, cranes, and other heavy lifting equipment where structural integrity is paramount. Surface treatment is typically available to enhance corrosion resistance for extended service life in diverse industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is free from debris and defects. 2. Prepare the mating surfaces for welding or mechanical fastening according to design specifications. 3. Securely attach the sheet using appropriate welding techniques or high-strength fasteners, adhering to load-bearing requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding procedures for carbon steel, leading to compromised joint strength. | Consult industry standards (e.g., AWS D1.1) for appropriate welding consumables, preheat, and post-weld heat treatment if required for the specific carbon steel grade and application. |
| Overlooking surface preparation, resulting in poor adhesion or weld quality. | Thoroughly clean the carbon steel surface, removing rust, scale, oil, and any contaminants before any fabrication process. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Fabrication of winch drums and cable guides, Construction of heavy-duty hoist components, Reinforcement plates for lifting brackets and lugs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||