This robust carbon steel stock sheet, precisely engineered for pulling and lifting operations, offers superior strength and durability. Its substantial dimensions and high-grade material make it ideal for heavy-duty industrial environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.978" |
| Length | 42" |
| Width | 35" |
Precision-manufactured to tight tolerances, this carbon steel stock sheet boasts a thickness of 0.978 inches, a length of 42 inches, and a width of 35 inches. Composed of high-tensile carbon steel, it exhibits excellent yield and tensile strength, ensuring exceptional performance under extreme load conditions. The consistent material properties and dimensional accuracy are critical for reliable operation in demanding pulling and lifting applications where structural integrity is paramount. Suitable for custom fabrication and reinforcement of heavy machinery and structural components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the area is clear of obstructions and properly illuminated. 2. Position the carbon steel stock sheet using appropriate lifting equipment, aligning it with intended mounting points. 3. Secure the sheet firmly using specified fasteners and welding procedures, adhering to relevant engineering codes.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or improperly rated fasteners for securing the sheet. | Always use fasteners that are specifically rated for the expected load and are compatible with carbon steel, ensuring proper torque and thread engagement. |
| Inadequate surface preparation before welding, leading to weak joints. | Thoroughly clean all welding surfaces to remove rust, paint, oil, and other contaminants to ensure a strong and reliable weld. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Reinforcement plates for heavy-duty winches and hoists, Structural components in custom pulling rigs and apparatus, Base plates and mounting surfaces for industrial lifting equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||