This robust carbon steel stock sheet offers exceptional load-bearing capacity for demanding pulling and lifting tasks. Precisely manufactured for reliability in industrial environments.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.977" |
| Length | 24" |
| Width | 35" |
Built to exacting engineering tolerances, this 0.977-inch thick carbon steel stock sheet boasts a substantial 24-inch length and 35-inch width. Its high tensile strength and yield point, inherent to quality carbon steel, ensure superior performance under extreme stress. This material's inherent ductility and resistance to fatigue make it ideal for applications requiring repeated cycles of load application and release, common in heavy industrial pulling and lifting operations where structural integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify the sheet is free from defects and meets dimensional requirements. 2. Clean the intended mounting surface to ensure optimal contact. 3. Securely fasten the sheet using appropriate industrial-grade hardware, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or inappropriate fasteners. | Always utilize fasteners rated for the maximum expected load and the specific material thickness. |
| Improper surface preparation leading to uneven stress. | Ensure the mounting surface is flat and clean to prevent localized stress concentrations. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy-duty winch anchor plates, Structural support in material handling systems, Custom fabricated lifting fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||