This high-strength carbon steel stock sheet, measuring 0.961" x 44" x 40", is engineered for demanding pulling and lifting operations. Its robust construction ensures exceptional durability and load-bearing capacity.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.961" |
| Length | 44" |
| Width | 40" |
Specified by design engineers worldwide, this 0.961" thick carbon steel stock sheet provides unparalleled structural integrity for critical pulling and lifting applications. Manufactured from high-grade carbon steel, it offers superior tensile strength and yield point, essential for safely handling heavy loads. Its substantial dimensions (44" length x 40" width) allow for versatile integration into complex rigging systems, overhead cranes, and heavy machinery frameworks. The material's inherent toughness ensures resilience against impact and abrasion in harsh industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, free of debris, and structurally sound to support the intended load. 2. Align the stock sheet with pre-drilled mounting holes or designated attachment points according to the project's engineering drawings. 3. Secure the stock sheet using appropriately rated fasteners (e.g., high-strength bolts and washers) torqued to manufacturer specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade fasteners. | Always utilize fasteners with a tensile strength rating that meets or exceeds the load capacity of the stock sheet and the application's requirements. Consult engineering specifications for precise fastener recommendations. |
| Inadequate surface preparation. | Thoroughly clean the mounting area to remove any contaminants, rust, or paint that could compromise the integrity of the connection and lead to premature failure. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy-duty rigging and hoist systems, Overhead crane construction and repair, Structural reinforcement for industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||