This robust 0.929-inch thick carbon steel stock sheet is engineered for extreme pulling and lifting tasks. Its substantial dimensions and high-strength material ensure reliable performance in the most challenging industrial environments.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.929" |
| Length | 35" |
| Width | 31" |
Precision-manufactured to tight tolerances, this carbon steel stock sheet boasts a thickness of 0.929 inches, a length of 35 inches, and a width of 31 inches. Composed of high-grade carbon steel, it offers exceptional tensile strength, yield strength, and abrasion resistance, making it ideally suited for heavy-duty applications such as custom fabrication of lifting fixtures, reinforcement plates for rigging points, and robust components in winching systems. Its dense microstructure and inherent toughness enable it to withstand significant static and dynamic loads without deformation or failure, ensuring operational safety and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any shipping damage. 2. Precisely mark and cut to required dimensions using appropriate cutting tools (e.g., plasma cutter, abrasive saw). 3. Grind edges smooth to remove burrs and prepare for welding or mounting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-strength fasteners for mounting. | Always employ fasteners with tensile and shear strengths that significantly exceed the anticipated loads. Consult engineering drawings or load charts. |
| Inadequate edge preparation before welding. | Ensure all cut edges are properly beveled and cleaned of all contaminants (oil, rust, scale) to achieve full weld penetration and structural integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom lifting point fabrication, Reinforcement plates for rigging, Components for heavy-duty winches and hoists.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||