This robust carbon steel stock sheet offers exceptional strength and durability, making it ideal for demanding industrial pulling and lifting operations. Engineered for performance and longevity.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.859" |
| Length | 36" |
| Width | 19" |
A proven choice for industrial professionals, this 0.859-inch thick carbon steel stock sheet delivers superior tensile strength and rigidity essential for high-stress pulling and lifting applications. Measuring 36 inches in length by 19 inches in width, its substantial mass and robust material properties ensure reliable performance under extreme loads. The inherent toughness of carbon steel provides excellent resistance to deformation and wear, guaranteeing a long service life in harsh environments. This sheet is a foundational component for custom fabrication of lifting lugs, rigging hardware, and structural supports within heavy machinery and material handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, free of debris, and structurally sound. 2. Position the carbon steel stock sheet according to the engineering design and mark all fastening points. 3. Drill pilot holes as specified and secure the sheet using appropriately rated fasteners for the intended load capacity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade fasteners. | Always use fasteners that meet or exceed the load-bearing requirements of the application and are compatible with carbon steel. |
| Neglecting surface preparation before installation. | Thoroughly clean the mounting area to ensure optimal contact and prevent premature corrosion or slippage. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Fabrication of custom lifting lugs and eye bolts, Reinforcement plates for rigging systems, Structural components in material handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||