This robust carbon steel stock sheet provides superior strength for demanding pulling and lifting applications. Engineered for reliability, its substantial thickness ensures it can withstand extreme loads and operational stresses.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.743" |
| Length | 39" |
| Width | 47" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a nominal thickness of 0.743 inches, a length of 39 inches, and a width of 47 inches. Composed of high-grade carbon steel, it exhibits excellent tensile strength, yield strength, and impact resistance, making it suitable for high-stress environments. Its dense material composition minimizes deformation under load and provides a stable platform for component mounting or structural reinforcement in heavy-duty industrial equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is properly supported and aligned with the intended mounting points. 2. Securely fasten the sheet using appropriate heavy-duty bolts, welds, or clamps as dictated by the application's load requirements. 3. Perform a thorough load test before engaging in full operational use to verify structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper load calculation leading to undersized support. | Always calculate the maximum anticipated load and select fasteners and mounting methods that exceed this requirement with a significant safety factor. |
| Ignoring environmental factors such as corrosion or extreme temperatures. | Consider applying protective coatings or selecting appropriate alloys if the sheet will be exposed to corrosive elements or extreme thermal cycles. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Reinforcement plates for heavy machinery, Custom mounting bases for lifting equipment, Structural components in industrial material handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||