This robust carbon steel stock sheet is engineered for demanding pulling and lifting applications. Its substantial thickness and precise dimensions ensure exceptional load-bearing capacity and reliability in challenging environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.710" |
| Length | 23" |
| Width | 47" |
Precision-manufactured to tight tolerances, this 0.710-inch thick carbon steel stock sheet measures 23 inches in length and 47 inches in width, offering a substantial surface area for robust structural integration. Composed of high-grade carbon steel, it exhibits excellent tensile strength and yield strength, making it ideal for applications requiring significant load-bearing capabilities. The material's inherent toughness and resistance to deformation under stress ensure prolonged service life in demanding industrial settings, including heavy machinery fabrication, structural reinforcement for lifting equipment, and custom fabrication projects.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any damage or defects prior to installation. 2. Ensure mounting surfaces are clean, level, and capable of supporting the intended load. 3. Securely fasten the sheet using appropriate high-strength fasteners, ensuring even distribution of stress.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-strength fasteners. | Always use fasteners rated for the maximum anticipated load and compatible with the carbon steel's grade to prevent premature failure. |
| Inadequate surface preparation for mounting. | Thoroughly clean and level mounting surfaces to ensure uniform contact and prevent stress concentrations on the sheet. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Structural reinforcement for cranes and hoists, Custom fabrication of heavy-duty lifting points, Base plates and support structures for industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||