This industrial-grade carbon steel stock sheet is engineered for demanding pulling and lifting operations. Its robust construction ensures superior strength and longevity in the most challenging environments.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.647" |
| Length | 35" |
| Width | 38" |
Purpose-built for heavy-duty applications, this carbon steel stock sheet boasts a substantial 0.647" thickness, a generous 35" length, and a 38" width. Manufactured from high-tensile carbon steel, it exhibits exceptional tensile strength and yield strength, making it ideal for applications involving significant mechanical stress. Its inherent toughness and resistance to deformation ensure reliable performance under extreme loads, preventing premature failure in critical pulling and lifting systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely position the stock sheet according to design specifications. 3. Securely fasten the stock sheet using appropriate grade fasteners and torque settings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade fasteners. | Always utilize fasteners with a shear strength and tensile strength equal to or exceeding the load requirements of the application and the stock sheet itself. |
| Inadequate surface preparation leading to poor adhesion or stress concentrations. | Thoroughly degrease and clean the mounting surface to eliminate contaminants that could compromise structural integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy machinery anchoring plates, Winch and hoist mounting bases, Structural reinforcement for lifting equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||