This heavy-duty carbon steel stock sheet is engineered for critical pulling and lifting applications. Its substantial dimensions and high-strength material ensure reliable performance under extreme loads in industrial settings.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.587" |
| Length | 23" |
| Width | 40" |
A high-performance industrial component, this carbon steel stock sheet measures 0.587 inches in thickness, 23 inches in length, and 40 inches in width. Fabricated from high-grade carbon steel, it exhibits excellent tensile strength, yield strength, and fatigue resistance, making it ideally suited for dynamic loading scenarios. The precise dimensions and material composition ensure predictable structural integrity and long service life when subjected to the rigors of pulling and lifting operations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately position the stock sheet according to design specifications. 3. Securely fasten the stock sheet using appropriate grade fasteners and torque values as per engineering drawings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade fasteners. | Always utilize fasteners that meet or exceed the load requirements and material specifications of the carbon steel stock sheet. |
| Improper surface preparation leading to corrosion. | Thoroughly clean and, if necessary, prime or coat the mounting surface and the stock sheet edges to prevent galvanic corrosion and environmental degradation. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy-duty winch bases and mounting plates, Crane and hoist structural components, Industrial towing and pulling fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||