This robust carbon steel stock sheet provides exceptional strength and durability for demanding plumbing and janitorial environments. Its substantial thickness ensures resilience against impact and wear in critical infrastructure.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.427" |
| Length | 36" |
| Width | 22" |
A high-performance industrial component, this carbon steel stock sheet is engineered for exceptional load-bearing capacity and structural integrity. Measuring 0.427 inches in thickness, 36 inches in length, and 22 inches in width, it offers a significant surface area for fabrication. The carbon steel material provides excellent tensile strength and resistance to deformation, making it suitable for fabricating custom brackets, reinforcement plates, and structural supports in plumbing systems, industrial cleaning stations, and janitorial equipment infrastructure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely measure and mark the sheet according to fabrication requirements. 2. Utilize appropriate cutting tools (e.g., abrasive cut-off wheel, plasma cutter) to shape the sheet. 3. Securely fasten the fabricated component using welding, bolting, or appropriate industrial adhesives, ensuring alignment with structural load paths.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using under-rated fasteners for securing the fabricated component. | Always select fasteners with a shear and tensile strength rating that exceeds the anticipated loads on the installed component. |
| Inadequate edge preparation before welding or joining. | Ensure all edges are clean, free of rust, paint, or contaminants, and properly beveled if required by the welding procedure for optimal joint integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom plumbing bracket fabrication, Reinforcement plates for heavy-duty janitorial equipment, Structural supports for industrial washdown stations.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||