This robust carbon steel stock sheet provides a foundational material for fabricating durable and high-pressure hydraulic components. Its substantial thickness ensures structural integrity under demanding operational conditions.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.398" |
| Length | 22" |
| Width | 18" |
A high-performance industrial component, this carbon steel stock sheet is precision-manufactured to specifications of 0.398 inches (10.1 mm) in thickness, 22 inches (558.8 mm) in length, and 18 inches (457.2 mm) in width. The material's inherent strength and ductility, characteristic of high-grade carbon steel, make it exceptionally suited for applications requiring resistance to significant mechanical stress and moderate corrosion. Its dense microstructure and consistent wall thickness are critical for leak-free seals and reliable functionality in demanding hydraulic circuits.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is cut to precise dimensions according to design specifications. 2. Clean surfaces thoroughly to remove any contaminants or surface treatments. 3. Fabricate and integrate into the hydraulic system following established welding and assembly protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to weld defects. | Thoroughly degrease and clean all surfaces to be welded or mated. |
| Using incorrect cutting methods, causing material stress or deformation. | Employ appropriate cutting techniques such as plasma or waterjet cutting to maintain material integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Pressure Vessel Components, Custom Hydraulic Cylinder Bases.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||