This high-strength carbon steel stock sheet is engineered for demanding pulling and lifting applications. Its robust 0.384" thickness and substantial 47" x 32" dimensions provide exceptional durability and load-bearing capacity for critical industrial tasks.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.384" |
| Length | 47" |
| Width | 32" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a material thickness of 0.384 inches, a length of 47 inches, and a width of 32 inches. Constructed from prime grade carbon steel, it offers superior tensile strength and yield strength, ensuring reliable performance under extreme stress and heavy loads. Its inherent toughness and resistance to deformation make it an ideal substrate for fabricating robust lifting equipment, structural reinforcement in heavy machinery, and as a foundational component for custom pulling assemblies where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any damage or defects prior to fabrication. 2. Utilize appropriate cutting and forming tools designed for 0.384" thick carbon steel. 3. Ensure all welding or joining processes adhere to industry-standard practices for carbon steel to maintain structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding consumables for carbon steel, leading to brittle joints. | Always use welding electrodes and filler metals specifically rated for the carbon steel grade being utilized, following manufacturer recommendations. |
| Ignoring the need for preheating or post-weld heat treatment on thicker sections. | Consult material datasheets and welding procedure specifications for recommended preheat and post-weld heat treatment to prevent cracking and ensure ductility. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Fabrication of custom lifting beams and frames, Reinforcement plates for heavy-duty machinery, Substrates for winch and hoist drum construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||