This robust carbon steel stock sheet provides a foundational component for demanding pulling and lifting systems. Its substantial thickness and dimensions ensure exceptional strength and stability under significant load.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.373" |
| Length | 47" |
| Width | 35" |
Engineered for reliability and performance, this 0.373" thick carbon steel stock sheet offers superior tensile strength and rigidity, critical for heavy-duty pulling and lifting operations. Measuring 47" in length and 35" in width, its substantial mass and material composition (typically ASTM A36 or equivalent) resist deformation and fatigue. The precise tolerances ensure compatibility with a wide range of fabrication processes, including cutting, welding, and machining, making it suitable for custom structural components in cranes, hoists, winches, and rigging assemblies. Its inherent durability guarantees extended service life in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any damage or warping prior to fabrication. 2. Accurately measure and mark cutting lines based on design specifications. 3. Fabricate or attach to existing structure using appropriate welding or fastening methods, adhering to industry standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for high-stress lifting applications without verifying grade and mechanical properties. | Always specify and verify that the carbon steel sheet meets or exceeds relevant ASTM standards (e.g., A36, A572) for the required tensile strength and yield point for the intended load. |
| Neglecting proper edge preparation before welding, leading to potential weld defects. | Ensure all cut edges are beveled and cleaned of mill scale, rust, and contaminants to achieve strong, reliable welds. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom crane and hoist structural components, Reinforcement plates for heavy-duty winches, Base plates and mounting structures for industrial pulling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||