This robust carbon steel stock sheet is engineered for critical pulling and lifting applications. Its substantial 0.282" thickness and precise dimensions ensure unwavering performance under extreme loads.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.282" |
| Length | 37" |
| Width | 16" |
Built to exacting engineering tolerances, this carbon steel stock sheet offers superior tensile strength and yield strength crucial for load-bearing applications. Measuring 0.282 inches thick, 37 inches in length, and 16 inches in width, its dense microstructure is optimized for resisting deformation and fatigue. The material composition, typically low-carbon steel, provides excellent weldability and machinability, facilitating integration into custom lifting assemblies and structural supports. Its inherent durability makes it ideal for environments requiring high resistance to abrasion and impact.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, level, and capable of supporting the intended load. 2. Position the carbon steel stock sheet accurately, aligning any pre-drilled holes or attachment points. 3. Securely fasten the sheet using appropriately rated bolts, welds, or other specified fastening methods, ensuring even distribution of stress.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-strength fasteners. | Always use fasteners that meet or exceed the load rating of the stock sheet and the application's requirements. |
| Improperly distributing weight or stress points. | Ensure the load is applied evenly across the sheet's surface or at designated strong points to prevent localized stress concentrations. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Reinforcement plates for lifting equipment, Custom structural components in heavy machinery, Base plates for industrial cranes and hoists.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||