This high-quality carbon steel stock sheet, precisely 0.272 inches thick and measuring 20 by 33 inches, is engineered for demanding hydraulic system fabrication. Its robust material properties ensure superior performance and longevity.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.272" |
| Length | 20" |
| Width | 33" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a nominal thickness of 0.272 inches, a length of 20 inches, and a width of 33 inches. Composed of high-grade carbon steel, it exhibits excellent tensile strength, yield strength, and formability, making it ideal for pressure vessels, hydraulic reservoirs, and structural components within hydraulic systems. The material's consistent composition ensures predictable machining and welding characteristics, crucial for maintaining the integrity and efficiency of hydraulic fluid containment and power transmission.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the sheet surface thoroughly to remove any grease, oil, or debris. 2. Precisely measure and mark cutting lines according to the hydraulic system design. 3. Utilize appropriate cutting tools (e.g., shears, plasma cutter) to achieve accurate dimensions, ensuring minimal burring.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, leading to deformation or uneven edges. | Ensure cutting blades or plasma consumables are sharp and properly maintained for clean, precise cuts. |
| Inadequate surface preparation before welding or sealing. | Thoroughly degrease and clean all surfaces to be joined to ensure optimal weld penetration and seal integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic reservoir fabrication, Pressure vessel construction, Hydraulic manifold blocks, Structural support for hydraulic machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||