This robust carbon steel stock sheet, precision-cut to 0.232" thickness, 33" length, and 25" width, is engineered for critical pressure and temperature control systems. Its inherent strength and durability ensure reliable performance in demanding environments.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.232" |
| Length | 33" |
| Width | 25" |
Manufactured under strict quality controls, this carbon steel stock sheet offers exceptional tensile strength and formability, crucial for pressure vessel fabrication and high-temperature applications. The material's composition provides excellent weldability and resistance to thermal stress, making it ideal for critical components in control systems. Dimensions of 0.232" x 33" x 25" ensure compatibility with standard fabrication processes and project requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity against engineering drawings. 2. Prepare edges for welding or fastening according to specified joint design. 3. Install sheet into the pressure or temperature control system, ensuring proper sealing and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding procedures for carbon steel, leading to embrittlement or poor joint integrity. | Employ preheating, interpass temperature control, and appropriate filler metals as per ASME Section IX or relevant welding codes for carbon steel. |
| Insufficient surface preparation, resulting in weld defects or poor adhesion of coatings. | Thoroughly clean the surface of the carbon steel sheet to remove mill scale, oil, grease, and other contaminants before any fabrication or coating. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pressure Vessel Components, Heat Exchanger Plates, High-Temperature Manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||