This robust carbon steel stock sheet is engineered for heavy-duty industrial applications within the pulling and lifting category. Its precise dimensions and material composition ensure reliable performance under significant stress.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.047" |
| Length | 18" |
| Width | 27" |
A proven choice for industrial professionals, this carbon steel stock sheet offers exceptional strength and durability. Measuring 0.047 inches in thickness, 18 inches in length, and 27 inches in width, it is manufactured from high-grade carbon steel, known for its superior tensile strength and resistance to deformation. This makes it ideal for fabricating custom components, reinforcement plates, and structural elements in pulling and lifting equipment where load-bearing capacity is paramount. Its consistent material properties facilitate predictable performance in critical operations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from any contaminants. 2. Position the sheet accurately for fabrication or integration into existing systems. 3. Secure the sheet using appropriate welding, bolting, or fastening techniques as per application requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong gauge steel for the intended load. | Always consult load charts and engineering specifications for the application to ensure the selected gauge (0.047" in this case) is adequate. |
| Improper edge preparation before welding, leading to weak joints. | Bevel edges appropriately to ensure full weld penetration and a strong, reliable bond. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Fabrication of custom lifting lugs and brackets, Reinforcement plates for pulleys and sheaves, Base plates for winches and hoists.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||