This carbon steel stock sheet is engineered for robust performance in hydraulic systems. Its precise dimensions and durable material ensure reliable fabrication of critical hydraulic components.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.076" |
| Length | 32" |
| Width | 43" |
Precision-manufactured to tight tolerances, this 0.076-inch thick carbon steel sheet offers exceptional dimensional stability for your hydraulic fabrication needs. Measuring 32 inches in length and 43 inches in width, it is processed from high-grade carbon steel, selected for its strength, weldability, and resistance to pressure and wear inherent in hydraulic applications. The material's mechanical properties are optimized to withstand the rigorous operational demands of fluid power systems, ensuring the integrity and longevity of manufactured parts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Accurately measure and mark cutting lines according to design specifications. 3. Fabricate using appropriate cutting, bending, and welding techniques for carbon steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel without verifying specific hydraulic grade properties. | Always confirm the carbon steel grade meets the tensile strength and weldability requirements for the intended hydraulic application. |
| Inaccurate cutting leading to component fitment issues. | Utilize precision cutting equipment and verify measurements against design drawings before and after each cut. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic manifold fabrication, Hydraulic cylinder component construction, Hydraulic reservoir plating.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||