This robust brass stock sheet, engineered for rigorous pulling and lifting tasks, offers exceptional strength and corrosion resistance. Its substantial dimensions make it ideal for heavy-duty components and custom fabrications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.795" |
| Length | 32" |
| Width | 31" |
A high-performance industrial component, this brass stock sheet provides superior tensile strength and excellent corrosion resistance, crucial for marine and harsh environmental applications within pulling and lifting systems. With a precise thickness of 0.795 inches, a generous length of 32 inches, and a width of 31 inches, it offers ample material for fabricating robust structural elements, sheave blocks, and custom rigging hardware. The inherent non-sparking properties of brass further enhance safety in potentially hazardous environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free from debris. 2. Carefully position the brass stock sheet according to the design specifications. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners not rated for corrosive environments. | Utilize stainless steel or brass fasteners specifically designed for marine or industrial environments to prevent galvanic corrosion. |
| Over-torquing fasteners, leading to stress concentrations in the brass. | Follow recommended torque values for the specific fastener size and type to avoid material deformation and potential failure. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom fabricated lifting eyes and brackets, Components for heavy-duty winch systems, Sheave block construction for marine cranes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||