This high-quality brass stock sheet is engineered for critical hydraulic system components. Its precise dimensions and inherent material properties ensure exceptional performance and longevity in demanding fluid power applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.116" |
| Length | 29" |
| Width | 39" |
A high-performance industrial component, this brass stock sheet boasts a precise thickness of 0.116 inches, a generous length of 29 inches, and a width of 39 inches. Fabricated from high-grade brass, it exhibits excellent machinability, superior corrosion resistance against a wide range of hydraulic fluids, and robust mechanical strength, making it ideal for fabricating custom hydraulic manifold blocks, fittings, and valve components where reliability and precision are paramount. Its dense, non-porous structure minimizes leakage potential.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Carefully cut the brass stock to the required component dimensions using appropriate cutting tools. 3. Machine the cut brass to final part geometry, adhering to all dimensional and surface finish tolerances.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys not rated for hydraulic fluid compatibility. | Always specify and verify that the brass alloy used meets industry standards for hydraulic fluid resistance and pressure ratings. |
| Inadequate support during machining, leading to distortion or inaccuracies. | Employ proper fixturing and clamping techniques during machining to maintain dimensional stability and achieve tight tolerances. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic manifold blocks, Custom hydraulic fittings, Hydraulic valve components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||