Engineered for robust hydraulic applications, this premium brass stock sheet offers superior corrosion resistance and machinability. Its precise dimensions ensure reliable performance in critical fluid power systems.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.895" |
| Length | 47" |
| Width | 44" |
Built to exacting engineering tolerances, this brass stock sheet measures 0.895 inches thick, 47 inches in length, and 44 inches in width. Composed of a high-strength brass alloy, it exhibits excellent resistance to corrosion and pitting, crucial for hydraulic environments. This material's inherent ductility and excellent machinability allow for intricate component fabrication. It is ideally suited for the manufacturing of hydraulic manifold blocks, valve bodies, pump components, and specialized fittings where fluid integrity and long-term durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with hydraulic fluid and operating pressures. 2. Fabricate components according to precise design specifications and dimensional requirements. 3. Ensure all machined surfaces are free of burrs and contamination prior to assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible brass alloys for specific hydraulic fluids. | Consult material data sheets and hydraulic fluid compatibility charts before selection to ensure optimal performance and prevent premature degradation. |
| Inadequate surface finishing on machined hydraulic interfaces. | Maintain strict surface finish standards (e.g., Ra values) to prevent leakage and ensure proper sealing within hydraulic assemblies. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic Manifold Blocks, Hydraulic Valve Bodies, Hydraulic Pump Components, Specialized Hydraulic Fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||