This brass stock sheet is engineered for demanding hydraulic applications. Its precise dimensions and superior brass composition ensure reliable performance, corrosion resistance, and extended service life in critical fluid power systems.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.027" |
| Length | 30" |
| Width | 18" |
Manufactured under strict quality controls, this brass stock sheet features a precise thickness of 0.027 inches, a length of 30 inches, and a width of 18 inches. Composed of high-grade brass, it exhibits excellent machinability, inherent corrosion resistance against a wide range of hydraulic fluids, and good tensile strength, making it ideal for fabricating hydraulic manifold blocks, custom fittings, valve components, and protective covers where integrity and chemical inertness are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the brass sheet is cut to the precise dimensions required for the hydraulic component. 2. Carefully deburr all cut edges to prevent contamination and ensure a smooth surface finish. 3. Integrate the fabricated brass component into the hydraulic system according to design specifications, ensuring proper sealing and fastening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a non-marine grade or lower-quality brass alloy. | Always specify and utilize a brass alloy suitable for the specific hydraulic fluid and operating environment to prevent premature corrosion and material degradation. |
| Inadequate deburring of cut edges. | Thoroughly deburr all edges after cutting to prevent the introduction of particulate matter into the hydraulic system, which can cause blockages and damage. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic manifold fabrication, Custom hydraulic fittings and connectors, Valve component manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||