This premium brass stock sheet is engineered for critical hydraulic applications. Its precise dimensions and robust material composition ensure reliable performance and longevity in demanding environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.760" |
| Length | 21" |
| Width | 38" |
A high-performance industrial component, this brass stock sheet is manufactured to exacting tolerances for critical hydraulic system integration. With a substantial thickness of 0.760 inches, a length of 21 inches, and a width of 38 inches, it provides ample material for fabrication and robust structural integrity. The inherent corrosion resistance of brass makes it ideal for environments where fluid compatibility and longevity are paramount, ensuring sustained operational efficiency and minimizing maintenance requirements in demanding hydraulic circuits.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the mating surfaces to remove any debris or contaminants. 2. Carefully position the brass stock sheet according to design specifications. 3. Securely fasten the sheet using appropriate hydraulic-grade fasteners and sealing compounds.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to leaks. | Ensure all mating surfaces are meticulously cleaned and free from any foreign particles before installation. |
| Over-tightening fasteners, causing material deformation. | Utilize torque wrenches and adhere to specified fastener tightening sequences to prevent stress on the brass. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic manifold fabrication, Custom hydraulic component construction, Pressure vessel and accumulator components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||