This premium brass stock sheet is engineered for critical hydraulic applications. Its robust composition and precise dimensions deliver exceptional durability and reliability under pressure.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.313" |
| Length | 34" |
| Width | 43" |
A high-performance industrial component, this brass stock sheet is manufactured from a high-copper alloy specifically chosen for its excellent corrosion resistance and machinability, crucial for hydraulic fluid compatibility and seal integrity. With precise dimensions of 0.313 inches thickness, 34 inches in length, and 43 inches in width, it offers a substantial surface area suitable for fabricating complex hydraulic manifold blocks, valve bodies, and custom fittings. The material's inherent strength and ductility allow for intricate shaping and joining methods, ensuring leak-free performance in demanding operational environments and extended service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all mating surfaces thoroughly to remove any debris or contaminants. 2. Accurately cut and machine the brass stock sheet to the required dimensions for the hydraulic component. 3. Apply appropriate sealant or gasket material during assembly to ensure a leak-proof seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible sealants or lubricants that can degrade brass over time. | Always consult hydraulic system specifications for recommended sealants and lubricants compatible with brass alloys. |
| Improper machining techniques leading to excessive heat or stress concentration. | Employ appropriate cutting speeds, feed rates, and coolant to prevent material damage and ensure precise tolerances. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic Manifold Fabrication, Custom Valve Bodies, Hydraulic Fitting Manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||