This brass stock sheet is engineered for critical hydraulic system components. Its precise dimensions and inherent material properties ensure optimal performance and longevity in demanding environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.011" |
| Length | 33" |
| Width | 13" |
Purpose-built for heavy-duty applications, this brass stock sheet (0.011" thickness, 33" length, 13" width) provides exceptional corrosion resistance and machinability vital for hydraulic fluid containment and flow control. The inherent properties of brass, including its ductility and resistance to dezincification, make it ideal for fabricating seals, gaskets, and custom fittings where integrity under pressure is paramount. This material's thermal conductivity also aids in heat dissipation within hydraulic circuits, contributing to system stability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface where the brass sheet will be installed is clean and free from debris. 2. Carefully cut the brass sheet to the required dimensions using appropriate metal cutting tools. 3. Secure the fabricated component to the hydraulic system, verifying all connections for a leak-free seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs and inconsistent edges. | Employ sharp, high-quality metal cutting blades designed for brass to achieve clean, precise cuts. |
| Over-tightening fasteners, potentially deforming the brass sheet. | Apply torque specifications recommended for brass components to prevent deformation and maintain seal integrity. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic Seal Fabrication, Custom Hydraulic Fitting Manufacturing, Hydraulic Manifold Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||