This premium brass stock sheet is engineered for demanding heating and cooling systems. Its superior thermal conductivity and corrosion resistance make it ideal for heat exchangers and other critical HVAC components.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.845" |
| Length | 24" |
| Width | 28" |
Precision-manufactured to tight tolerances, this 0.845-inch thick brass stock sheet measures 24 inches in width and 28 inches in length. Composed of a high-copper alloy (typically 60-70% copper), it offers excellent thermal conductivity, crucial for efficient heat transfer in HVAC applications. Its inherent corrosion resistance ensures longevity and performance in demanding thermal environments, preventing degradation from moisture and common atmospheric agents found in heating and cooling systems. This material is readily formable and machinable, allowing for intricate component fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the brass sheet is clean and free of debris. 2. Fabricate the sheet to the required dimensions according to system design. 3. Securely install the fabricated component within the HVAC system, ensuring proper sealing and thermal contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using an incompatible braising or soldering alloy. | Always use a braising or soldering alloy specifically rated for brass and suitable for the operating temperatures and pressures of the HVAC system. |
| Inadequate surface preparation before joining. | Thoroughly clean and degrease all mating surfaces of the brass sheet and connecting components to ensure a strong, leak-free joint. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heat Exchangers, Condenser Coils, Evaporator Coils, Ductwork Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||