This robust brass stock sheet, engineered for pulling and lifting applications, offers superior strength and corrosion resistance. Its precise dimensions ensure reliable performance in demanding industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.196" |
| Length | 36" |
| Width | 17" |
Manufactured under strict quality controls, this brass stock sheet boasts a thickness of 0.196 inches, a length of 36 inches, and a width of 17 inches. Composed of a high-grade brass alloy, it exhibits excellent tensile strength and remarkable resistance to environmental corrosion and abrasion, making it ideal for components subjected to significant stress and wear in pulling and lifting systems. The material's inherent non-sparking properties further enhance its suitability for hazardous environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free from contaminants. 2. Accurately measure and mark the desired cutting or drilling locations on the brass sheet. 3. Securely fasten the brass sheet using appropriate industrial-grade fasteners, ensuring even distribution of load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners for mounting. | Utilize fasteners with a diameter and load rating sufficient to support the intended operational forces. |
| Exposing the brass sheet to highly acidic or alkaline environments without proper sealing. | Apply a suitable industrial sealant or coating to protect the brass from aggressive chemical attack if the application environment warrants. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Structural components in winch and hoist systems, Wear plates and guides in material handling equipment, Custom fabrication for pulley blocks and sheaves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||