This precision-engineered brass stock sheet is a critical component for high-pressure hydraulic systems. Its robust material composition and exact dimensions ensure reliable performance and longevity in demanding industrial environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.622" |
| Length | 30" |
| Width | 26" |
A high-performance industrial component, this brass stock sheet is manufactured to exacting standards for use in demanding hydraulic applications. Measuring 0.622 inches in thickness, 30 inches in length, and 26 inches in width, it offers exceptional dimensional stability. The inherent properties of brass, including excellent corrosion resistance to a wide range of hydraulic fluids and superior machinability for intricate component fabrication, make it the material of choice for pressure vessels, manifold blocks, and valve bodies within hydraulic circuits. Its dense microstructure minimizes porosity, crucial for maintaining system integrity under high pressure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the brass stock sheet is clean and free from any contaminants. 2. Accurately machine the sheet to the required component dimensions according to engineering drawings. 3. Integrate the fabricated brass component into the hydraulic system, adhering to all sealing and connection specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys not rated for hydraulic pressure. | Always verify the specific brass alloy designation and its suitability for the intended hydraulic pressure and fluid compatibility. |
| Inadequate deburring after machining, leading to potential fluid contamination. | Thoroughly deburr all cut edges and machined surfaces to prevent particulate generation within the hydraulic system. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic Manifold Blocks, Hydraulic Valve Bodies, Hydraulic Pressure Vessel Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||