Engineered for demanding environments, this 0.660-inch thick brass stock sheet offers exceptional corrosion resistance and thermal conductivity, ideal for pressure and temperature control applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.660" |
| Length | 31" |
| Width | 44" |
A proven choice for industrial professionals, this 0.660" thick brass stock sheet, measuring 31" x 44", is manufactured from high-quality brass alloys. Its superior thermal conductivity ensures efficient heat transfer critical for temperature regulation, while its inherent strength and corrosion resistance make it suitable for high-pressure environments. This material is selected for its reliability in demanding applications where consistent performance and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Accurately cut the brass sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut brass components according to system design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting tool selection leading to burrs or deformation. | Utilize carbide-tipped blades or waterjet cutting for clean, precise edges on brass. |
| Inadequate surface preparation before assembly, causing poor sealing. | Thoroughly clean and degrease all mating surfaces to ensure optimal seal integrity. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure vessel fabrication, Heat exchanger components, Temperature regulation systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||