This robust brass stock sheet provides exceptional strength and corrosion resistance, making it an ideal component for heavy-duty pulling and lifting equipment where reliability is paramount.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.382" |
| Length | 25" |
| Width | 23" |
Trusted by engineers across multiple sectors, this brass stock sheet offers a substantial 0.382" thickness, ensuring robust structural integrity for critical pulling and lifting operations. Its inherent brass composition provides excellent tensile strength, wear resistance, and a high degree of natural corrosion resistance, particularly in marine or humid environments. The 25" length and 23" width offer significant surface area for custom fabrication into sheaves, pulleys, reinforcement plates, or structural supports, meeting stringent industrial demands.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean and prepare mounting surfaces to ensure a flush fit. 2. Secure the brass sheet using appropriate high-strength fasteners, ensuring even load distribution. 3. Verify all connections and structural integrity before applying load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate fastener selection for the application's load capacity. | Always select fasteners rated for or exceeding the maximum anticipated load of the pulling or lifting system. |
| Failure to consider environmental factors affecting brass longevity. | Apply protective coatings or sealants if the sheet will be exposed to highly aggressive chemicals or extreme pH conditions. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom fabricated pulley blocks, Reinforcement plates for lifting slings, Structural components in winches and hoists.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||