This substantial brass stock sheet is engineered for extreme duty in pulling and lifting applications. Its robust dimensions and high-grade brass construction ensure exceptional durability and long-term performance under severe operational stress.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.607" |
| Length | 41" |
| Width | 43" |
A high-performance industrial component, this brass stock sheet boasts a precise thickness of 0.607 inches, a generous length of 41 inches, and a substantial width of 43 inches. Fabricated from high-purity brass, it offers superior tensile strength, excellent corrosion resistance against a wide range of chemicals and environments, and non-sparking properties crucial for hazardous area operations. Its substantial mass and inherent ductility make it suitable for fabricating custom lifting lugs, heavy-duty pull plates, and structural components within demanding industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Position the brass stock sheet according to the design specifications for the pulling or lifting application. 3. Securely fasten the sheet using appropriately rated hardware (bolts, welds) suitable for the intended load capacity and environmental conditions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade fasteners for attachment. | Always utilize fasteners that meet or exceed the calculated shear and tensile strength requirements for the anticipated load, considering the brass's mechanical properties. |
| Failing to account for potential galvanic corrosion when in contact with dissimilar metals. | Implement isolation measures, such as non-conductive washers or coatings, when mounting this brass sheet adjacent to materials like aluminum or steel in corrosive environments. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom fabricated lifting points and lugs, Heavy-duty pull plates for winches and hoists, Reinforcement plates for industrial machinery in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||