This robust brass stock sheet is engineered for superior performance in heavy-duty pulling and lifting scenarios. Its inherent strength and corrosion resistance make it a reliable choice for industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.837" |
| Length | 46" |
| Width | 17" |
A high-performance industrial component, this brass stock sheet offers exceptional durability and corrosion resistance, crucial for demanding pulling and lifting applications. Manufactured from premium brass, it boasts a substantial 0.837-inch thickness, a generous 46-inch length, and a 17-inch width, providing ample material for custom fabrication and reinforcement. The inherent properties of brass, including its excellent machinability and non-sparking characteristics, further enhance its suitability for a wide range of industrial uses where safety and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to ensure optimal adhesion and structural integrity. 2. Carefully position the brass stock sheet according to engineering drawings and load-bearing requirements. 3. Secure the sheet using appropriate fasteners, ensuring even distribution of stress and compliance with load specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation leading to compromised structural integrity. | Ensure all mounting surfaces are free from contaminants, grease, and debris before installation. |
| Over-tightening fasteners, which can deform the brass and weaken the joint. | Use torque wrenches to tighten fasteners to the manufacturer's recommended specifications for brass components. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Reinforcement plates in lifting equipment, Custom fabricated structural components for winches and hoists, Wear surfaces in guide mechanisms for pulling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||