This robust brass stock sheet, engineered for demanding pulling and lifting applications, provides exceptional durability and resistance to corrosive environments. Its precise dimensions ensure reliable performance in critical industrial settings.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.071" |
| Length | 13" |
| Width | 43" |
A proven choice for industrial professionals, this brass stock sheet (0.071" thickness, 13" length, 43" width) is fabricated from high-grade brass alloys, ensuring superior tensile strength and fatigue resistance crucial for pulling and lifting mechanisms. The material's inherent corrosion resistance guarantees longevity in diverse operational conditions, while its excellent machinability allows for custom fabrication and integration into complex systems. This sheet is ideal for applications requiring non-sparking properties and reliable structural integrity under load.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately measure and cut the brass stock sheet to the required dimensions for the specific application. 3. Securely fasten the sheet using appropriate industrial-grade fasteners, ensuring even distribution of load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fasteners that may corrode or fail under load. | Utilize stainless steel or brass fasteners specifically rated for the expected load and environmental conditions. |
| Inadequate support leading to premature material fatigue. | Ensure the brass sheet is adequately supported across its entire surface or along designated load-bearing points as per design specifications. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Wear plates in pulley systems, Reinforcement for lifting slings, Components for specialized rigging hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||