Engineered for superior performance in demanding environments, this brass stock sheet offers exceptional strength and corrosion resistance, ideal for heavy-duty pulling and lifting applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.474" |
| Length | 34" |
| Width | 18" |
Built to exacting engineering tolerances, this brass stock sheet measures 0.474 inches in thickness, 34 inches in length, and 18 inches in width. Fabricated from premium brass alloy, it exhibits excellent tensile strength and a high yield point, ensuring reliable performance under significant mechanical stress. Its inherent non-sparking properties and resistance to corrosive elements make it an optimal choice for environments where safety and longevity are paramount, such as marine operations, industrial machinery, and specialized construction.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately mark and pre-drill all fastening points according to design specifications. 3. Secure the brass stock sheet using appropriate grade fasteners, ensuring even torque distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or incompatible fasteners. | Always use fasteners of sufficient grade and diameter, rated for the intended load and environment, to ensure structural integrity. |
| Improper surface preparation leading to stress points. | Thoroughly inspect and prepare the mounting surface, ensuring it is flat and uniform to prevent localized stress on the brass sheet during installation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty winch components, Marine deck hardware, Industrial lifting apparatus, Custom fabrication for corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||