This premium brass stock sheet is engineered for critical hydraulic system components. Its robust construction and precise dimensions guarantee superior performance, longevity, and leak-free operation in demanding fluid power applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.816" |
| Length | 15" |
| Width | 44" |
Built to exacting engineering tolerances, this 0.816-inch thick brass stock sheet offers exceptional dimensional stability. Composed of a high-strength brass alloy, it exhibits excellent corrosion resistance and machinability, making it ideal for fabricating robust hydraulic manifold blocks, valve bodies, and pressure fittings. The material's inherent strength ensures it can withstand significant hydraulic pressures and thermal cycling without deformation or failure. Its surface finish is optimized for sealing, minimizing the risk of leaks in high-pressure hydraulic circuits.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces of the hydraulic component are clean, flat, and free from debris. 2. Carefully position the brass stock sheet onto the prepared mounting surface, aligning all necessary holes and features. 3. Secure the stock sheet using appropriate fasteners, applying torque in a pattern that ensures even pressure distribution, as per the component's design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using non-annealed or improperly straightened brass, leading to warpage during machining. | Always source brass stock that is certified as fully annealed and properly straightened to prevent dimensional instability during fabrication. |
| Inadequate surface preparation of mating hydraulic components, causing leaks. | Thoroughly inspect and machine mating surfaces to a specified flatness and surface finish to ensure a proper seal. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic Manifold Blocks, Hydraulic Valve Bodies, Custom Hydraulic Fittings, Pressure Vessel Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||