This high-strength brass stock sheet is engineered for robust pulling and lifting operations. Its dense, non-sparking composition and substantial thickness ensure reliable performance under extreme loads in challenging industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.745" |
| Length | 13" |
| Width | 47" |
Designed for demanding industrial environments, this brass stock sheet offers exceptional durability and corrosion resistance. With precise dimensions of 0.745 inches thickness, 13 inches width, and 47 inches length, it meets rigorous performance standards. The inherent properties of brass, including its high tensile strength and non-magnetic characteristics, make it ideal for applications where electrical conductivity is a concern or where spark generation must be minimized. This sheet is engineered for longevity and consistent performance in heavy-duty pulling and lifting machinery, ensuring operational safety and efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify the stock sheet's dimensions and material integrity prior to installation. 2. Securely fasten the brass stock sheet to the lifting or pulling mechanism using appropriate industrial-grade fasteners and mounting hardware, ensuring even load distribution. 3. Conduct a thorough load test with a safety margin before initiating full operational use.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or inappropriate fasteners. | Always use fasteners rated for the intended load capacity and compatible with brass to prevent premature failure and ensure secure mounting. |
| Improper alignment leading to uneven stress distribution. | Ensure precise alignment during installation to distribute the load uniformly across the entire surface of the brass stock sheet, preventing localized stress points. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty winch components, Custom rigging and pulley systems, Reinforcement plates for lifting equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||