This high-performance brass stock sheet is engineered for superior strength and longevity in rigorous industrial pull and lift applications. Its substantial thickness and durable brass composition ensure reliable operation under heavy loads.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.865" |
| Length | 48" |
| Width | 16" |
Designed for demanding industrial environments, this brass stock sheet boasts exceptional tensile strength and corrosion resistance, crucial for pulling and lifting applications. Measuring 0.865 inches in thickness, 48 inches in length, and 16 inches in width, it provides a robust platform for custom fabrication of pulleys, sheaves, and structural components. The inherent non-sparking properties of brass also make it suitable for environments where ignition sources are a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is properly supported and secured before cutting or shaping. 2. Use appropriate industrial cutting tools designed for metal fabrication, such as abrasive saws or waterjet cutters. 3. Smooth all edges and surfaces after fabrication to remove burrs and sharp points for safety.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard woodworking tools for cutting, leading to tool damage and poor cut quality. | Utilize heavy-duty metal cutting equipment, such as band saws with appropriate metal blades, plasma cutters, or abrasive chop saws. |
| Failing to account for material expansion/contraction during fabrication, resulting in dimensional inaccuracies. | Allow for thermal expansion and contraction in design and cutting processes, especially when working with large sheets or in temperature-fluctuating environments. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom fabricated pulley systems, Reinforcement plates for lifting gear, Structural components for winches and hoists.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||