This robust brass stock sheet is engineered for demanding pressure and temperature control systems. Its superior material properties ensure reliable performance in critical applications, offering excellent durability and service life.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.489" |
| Length | 37" |
| Width | 16" |
Engineered for reliability and performance, this brass stock sheet boasts a precise thickness of 0.489 inches, a substantial length of 37 inches, and a width of 16 inches. Composed of high-grade brass, it exhibits exceptional corrosion resistance, high thermal conductivity, and excellent machinability, making it ideal for fabrication into vital components for pressure and temperature regulation. Its inherent strength and malleability allow for intricate designs and dependable operation under varying environmental conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from debris. 2. Accurately cut the brass sheet to the required dimensions for the specific component. 3. Fabricate and integrate the component into the pressure or temperature control system, following all relevant design specifications and safety protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs or deformation. | Employ sharp, high-quality cutting tools specifically designed for brass to ensure clean cuts and prevent material damage. |
| Insufficient attention to surface preparation before fabrication. | Thoroughly clean and degrease the brass surface to ensure proper adhesion or welding if required by the application. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure vessel construction, Heat exchanger components, Valve bodies and fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||