This robust brass stock sheet, precision-engineered to 0.943" thickness, offers superior corrosion resistance and excellent machinability for critical hydraulic systems. Ideal for custom fabrication.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.943" |
| Length | 30" |
| Width | 46" |
Manufactured under strict quality controls, this brass stock sheet is comprised of a high-grade brass alloy, ensuring exceptional durability and resistance to a wide range of hydraulic fluids and environmental factors. With precise dimensions of 0.943" thickness, 30" in length, and 46" in width, it is ideally suited for the fabrication of complex hydraulic manifold blocks, fittings, and specialized components where material integrity and long-term performance are paramount. Its inherent machinability allows for intricate designs and tight tolerances required in high-pressure hydraulic circuits.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended hydraulic fluid and operating environment. 2. Ensure the sheet is properly supported and secured during all cutting and machining operations. 3. Smooth all edges and deburr thoroughly after fabrication to prevent fluid contamination or flow restrictions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower-grade or incompatible brass alloy. | Always specify and verify that the brass stock sheet meets the required industry standards and alloy composition for hydraulic service. |
| Inadequate edge finishing after machining. | Thoroughly deburr and smooth all cut edges to prevent micro-fractures and potential leaks in high-pressure hydraulic lines. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic Manifold Blocks, Custom Hydraulic Fittings, Fluid Power Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||