This robust brass stock sheet provides exceptional strength and corrosion resistance, making it the superior choice for critical pulling and lifting applications where reliability is paramount.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.685" |
| Length | 18" |
| Width | 40" |
Specified by design engineers worldwide, this brass stock sheet is manufactured to exacting tolerances, featuring a precise thickness of 0.685 inches, a substantial length of 18 inches, and a generous width of 40 inches. Composed of high-grade brass alloy, it exhibits excellent tensile strength and fatigue resistance, crucial for withstanding repeated stress cycles common in pulling and lifting operations. Its inherent non-sparking properties and resistance to environmental degradation further enhance its suitability for challenging industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the lifting/pulling apparatus is designed to accommodate the specified dimensions and material properties of the brass sheet. 2. Securely fasten the brass sheet to the load or mechanism using appropriate high-strength fasteners rated for the intended load capacity. 3. Conduct a thorough load test to verify the integrity of the installation and the operational safety of the system before full deployment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners or improperly torqued bolts. | Always utilize fasteners with a tensile strength exceeding the expected load and torque them to manufacturer specifications to prevent slippage or failure. |
| Exposing the brass sheet to aggressive chemicals that could cause corrosion. | Identify and avoid contact with any corrosive agents in the operating environment; consider protective coatings if necessary. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty winch components, Industrial crane rigging, Specialized material handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||