This heavy-duty brass stock sheet is engineered for demanding pulling and lifting applications. Its substantial thickness and inherent material properties ensure exceptional strength and longevity in harsh industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.832" |
| Length | 35" |
| Width | 34" |
A high-performance industrial component, this brass stock sheet boasts a precise thickness of 0.832 inches, a generous length of 35 inches, and a width of 34 inches. Manufactured from high-grade brass, it offers superior tensile strength, excellent corrosion resistance, and a moderate electrical conductivity, making it suitable for a wide array of industrial tasks. Its density and malleability allow for custom fabrication and reliable performance under significant load.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions against project requirements. 2. Utilize appropriate cutting and shaping tools for brass. 3. Secure sheet firmly using recommended fastening methods for the specific application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Attempting to cut with standard steel cutting tools without appropriate blades. | Use high-speed steel (HSS) or carbide-tipped blades specifically designed for cutting non-ferrous metals like brass. |
| Overheating the brass during fabrication, leading to annealing and loss of temper. | Employ controlled heat application and adequate cooling to maintain the desired material properties. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom fabricated structural components for lifting equipment, Reinforcement plates in heavy-duty pulling systems, Wear surfaces in marine and industrial environments requiring corrosion resistance.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||