This high-quality brass stock sheet, ideal for heating and cooling systems, offers superior thermal conductivity and corrosion resistance. Its robust dimensions ensure ample material for critical component fabrication.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.484" |
| Length | 31" |
| Width | 45" |
Built to exacting engineering tolerances, this brass stock sheet measures 0.484 inches in thickness, with a length of 31 inches and a width of 45 inches. Composed of a robust brass alloy, it exhibits exceptional thermal conductivity, making it a prime choice for heat exchangers, radiators, and other thermal management components within HVAC systems. The material's inherent corrosion resistance ensures longevity and reliability in demanding operational environments, preventing degradation from moisture or common atmospheric agents.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating surfaces thoroughly to remove any debris or contaminants. 2. Position the brass sheet according to design specifications, ensuring proper alignment. 3. Secure the sheet using appropriate fastening methods, such as welding, brazing, or mechanical fasteners, as dictated by the application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation before joining. | Ensure all surfaces are scrupulously cleaned and free of oils, grease, or oxides to guarantee a strong and leak-free joint. |
| Overheating during welding or brazing. | Utilize appropriate heat input control to prevent excessive grain growth or material distortion, maintaining the desired mechanical properties. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heat Exchanger Fabrication, Radiator Components, HVAC Ductwork Linings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||