This robust brass stock sheet, measuring 0.633 inches thick, 35 inches long, and 15 inches wide, is engineered for superior performance in demanding pulling and lifting applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.633" |
| Length | 35" |
| Width | 15" |
Designed for demanding industrial environments, this brass stock sheet offers exceptional strength and corrosion resistance, crucial for applications in marine, chemical processing, and heavy manufacturing. Its substantial 0.633" thickness provides the necessary structural integrity for high-stress pulling and lifting operations. The inherent non-sparking properties of brass make it ideal for use in hazardous or explosive atmospheres. With a precise length of 35" and width of 15", this sheet ensures consistent performance and reliable material handling solutions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately mark the desired mounting points for the sheet. 3. Securely fasten the brass stock sheet using appropriate industrial-grade fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate fasteners that cannot support the load. | Utilize high-tensile strength bolts or rivets specifically rated for the intended load capacity and environment. |
| Mounting the sheet on an uneven or unstable surface. | Verify the mounting surface is perfectly level and structurally sound before installation to prevent stress concentrations. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty pull plates, Reinforcement for lifting fixtures, Custom fabrication for material handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||