This premium brass stock sheet is engineered for exceptional performance in pulling and lifting applications. Its robust construction and superior material properties ensure reliability and longevity in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.084" |
| Length | 33" |
| Width | 28" |
Precision-manufactured to tight tolerances, this brass stock sheet measures 0.084 inches in thickness, 33 inches in length, and 28 inches in width. Composed of high-grade brass alloy, it offers excellent tensile strength, corrosion resistance, and electrical conductivity, making it ideal for applications where non-sparking properties are critical. The material's inherent ductility allows for formability without compromising structural integrity. This sheet is suitable for fabricating custom components, reinforcement plates, and wear surfaces within heavy-duty pulling and lifting equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately position the brass stock sheet according to design specifications. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners which can lead to galvanic corrosion with brass. | Utilize stainless steel or brass fasteners to prevent galvanic corrosion and ensure long-term integrity. |
| Over-tightening fasteners, which can deform the brass sheet and compromise its strength. | Tighten fasteners to the recommended torque specifications for brass to avoid material deformation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom fabrication of lifting lugs and brackets, Reinforcement plates for heavy-duty winches, Non-sparking components for hazardous environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||