This brass stock sheet is engineered for superior performance in demanding pulling and lifting applications. Its substantial thickness and robust brass composition offer exceptional strength and durability for critical operations.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.506" |
| Length | 12" |
| Width | 42" |
Specified by design engineers worldwide, this brass stock sheet is fabricated from a high-tensile brass alloy, offering excellent corrosion resistance and non-sparking properties crucial for hazardous environments. With precise dimensions of 0.506 inches thickness, 12 inches width, and 42 inches length, it provides a substantial material platform for custom fabrication of lifting lugs, pulling plates, and specialized rigging components. Its inherent strength-to-weight ratio ensures reliability under significant load conditions, making it a preferred choice for marine, industrial, and offshore applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean, dry, and free from debris. 2. Precisely mark and drill mounting holes according to design specifications. 3. Securely fasten the brass stock sheet using appropriate high-strength fasteners and torque settings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or incompatible fasteners. | Always use fasteners that meet or exceed the tensile strength requirements of the brass sheet and the intended load. |
| Improper hole drilling leading to stress concentrations. | Utilize sharp drill bits and appropriate speeds to create clean, burr-free holes, avoiding sharp edges that could initiate cracks. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom Lifting Lugs, Reinforced Pulling Plates, Specialized Rigging Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||