This robust brass stock sheet is engineered for demanding pulling and lifting operations. Its superior corrosion resistance and non-sparking characteristics make it ideal for environments where safety and durability are paramount.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.201" |
| Length | 14" |
| Width | 21" |
Manufactured under strict quality controls, this brass stock sheet boasts precise dimensions of 0.201 inches in thickness, 14 inches in length, and 21 inches in width. Constructed from high-grade brass, it exhibits exceptional tensile strength and resistance to corrosion and wear, making it suitable for heavy-duty applications where electrical conductivity and non-sparking properties are critical. Its inherent malleability allows for custom fabrication and forming.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the intended mounting surface is clean, dry, and free of debris. 2. Position the brass stock sheet according to the design requirements, aligning any pre-drilled holes or fastening points. 3. Secure the sheet firmly using appropriate fasteners, ensuring even pressure distribution to prevent deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners which can lead to galvanic corrosion with brass. | Utilize fasteners made from compatible materials such as stainless steel or brass to prevent dissimilar metal corrosion. |
| Over-tightening fasteners, potentially causing stress fractures or deformation of the sheet. | Apply torque gradually and evenly, adhering to recommended fastener specifications for the thickness of the brass sheet. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom fabricated lifting points and eye bolts, Non-sparking tool components for hazardous environments, Wear plates and friction surfaces in lifting mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||