This robust brass stock sheet is engineered for heavy-duty pulling and lifting operations. Its superior material properties ensure exceptional performance and longevity in challenging industrial settings.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.315" |
| Length | 38" |
| Width | 35" |
Designed for demanding industrial environments, this brass stock sheet measures 0.315 inches in thickness, 38 inches in length, and 35 inches in width. Crafted from high-grade brass, it exhibits excellent tensile strength and resistance to corrosion, making it suitable for applications where exposure to moisture or corrosive substances is a concern. The material's inherent non-sparking properties are critical in hazardous environments. Its substantial dimensions and robust construction make it an ideal component for custom fabrication of pulling and lifting equipment, such as specialized sheaves, guide rollers, or reinforcement plates.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely position the brass stock sheet according to design specifications. 3. Securely fasten the sheet using appropriate industrial-grade fasteners, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners not rated for industrial loads. | Utilize high-strength, corrosion-resistant fasteners specifically designed for the anticipated load and environmental conditions. |
| Inadequate surface preparation leading to poor adhesion or stress points. | Thoroughly clean and deburr all edges and surfaces of the brass sheet and mounting area before installation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom fabrication of lifting blocks and pulleys, Reinforcement plates for heavy-duty winches, Components for marine-grade pulling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||