This robust brass stock sheet is engineered for superior strength and longevity in demanding pulling and lifting scenarios. Its substantial dimensions and corrosion-resistant properties ensure reliable performance under strenuous conditions.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.975" |
| Length | 17" |
| Width | 43" |
Engineered for reliability and performance, this brass stock sheet boasts a precise thickness of 0.975 inches, a generous length of 17 inches, and a width of 43 inches. Crafted from high-grade brass, it exhibits excellent tensile strength and inherent resistance to environmental degradation, making it exceptionally suitable for applications involving significant mechanical stress and exposure to corrosive elements. The material's non-sparking properties further enhance its utility in hazardous environments. This specification ensures consistent load-bearing capacity and operational integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the brass stock sheet according to the engineering design. 3. Secure the sheet using appropriate fasteners, ensuring even distribution of load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or improperly rated fasteners. | Always select fasteners that are specifically designed for the intended load and environmental conditions, with materials compatible with brass to prevent galvanic corrosion. |
| Over-tightening fasteners, leading to deformation of the sheet. | Apply torque gradually and evenly, utilizing a torque wrench to adhere to specified tension values, thus preventing material stress fractures. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Reinforcement plates for heavy-duty pulleys, Wear surfaces in lifting mechanisms, Custom fabrication for specialized lifting equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||